Complexation and Separation of Amines,Amino Acids,and Peptides by Functionalized Calix[<Emphasis Type="Italic">n</Emphasis>]arenes

The ability of calix[n]arenes to form complexes, to act as extractants in liquid–liquid extraction, and run as carriers in transport through liquid membranes of different biological amine compounds (e.g., ammonium ion, amines, amino acids, and peptides) has been the central topics of many reports. These features recommend the calix[n]arenes as competitive candidates for studying the interactions involved in host–guest recognition as well as useful receptors in separation processes. Some specific aspects of their applications in binding and separation of various amine compounds by extraction, and in transport through liquid membranes have therefore been considered. The effect of the factors that might influence the separation of above compounds by extraction, and the transport through liquid membranes using the calix [n]arenes has been presented.This revised version was published online in July 2005 with a corrected issue number.     

A new type of entanglement involving one-dimensional ribbons of rings catenated to a three-dimensional network in the nanoporous structure of [Co(bix)2(H2O)2](SO4).7H2O [bix = 1,4-bis(imidazol-1-ylmethyl)benzene

Co(II) sulfate reacts with the flexible ligand 1,4-bis(imidazol-1-ylmethyl)benzene (bix) to yield the coordination network [Co(bix)2(H2O)2](SO4).7H2O, containing polymeric ribbons of rings which penetrate and catenate a 3D single frame of the CdSO4 topology, to produce an open-channel entangled architecture with nanoporous behaviour.     

Phenylated polyimides via bifunctional monomers

The synthesis of two phenylated bifunctional monomers, dimethyl 4-(4-(p-aminophenoxy)phenyl)-3,5,6-triphenylphthalate and dimethyl 4-(4-(4-(p-aminophenoxy)phenoxy)phenyl)-3,5,6-triphenylphthlate, was accomplished. Polymerization in solution or by a bulk polymerization procedure yielded a series of low molecular weight phenylated polyimides. The polymers were soluble in chlorinated hydrocarbons and exhibited thermal stabilities comparable to other polyimide systems.     

Electronic energy transfer and collection in luminescent molecular rods containing ruthenium(II) and osmium(II) 2,2':6',2"-terpyridine complexes linked by thiophene-2,5-diyl spacers

The electronic absorption spectra, luminescence spectra and lifetimes (in MeCN at room temperature and in frozen n-C3H7CN at 77 K), and electrochemical potentials (in MeCN) of the novel dinuclear [(tpy)Ru(3)Os(tpy)]4+ and trinuclear [(tpy)Ru(3)Os(3)Ru(tpy)]6- complexes (3 = 2,5-bis(2,2':6',2'-terpyridin-4-yl)thiophene) have been obtained and are compared with those of model mononuclear complexes and homometallic [(tpy)Ru(3)Ru(tpy)]4+, [(tpy)Os(3)Os(tpy)]4+ and [(tpy)Ru(3)Ru(3)Ru(tpy)]6+ Complexes. The bridging ligand 3 is nearly planar in the complexes, as seen from a preliminary X-ray determination of [(tpy)Ru(3)Ru(tpy)][PF6]4, and confers a high degree of rigidity upon the polynuclear species. The trinuclear species are rod-shaped with a distance of about 3 nm between the terminal metal centres. For the polynuclear complexes, the spectroscopic and electrochemical data are in accord with a significant intermetal interaction. All of the complexes are luminescent (phi in the range 10(-4)-10(-2) and tau in the range 6-340 ns, at room temperature), and ruthenium- or osmium-based luminescence properties can be identified. Due to the excited state properties of the various components and to the geometric and electronic properties of the bridge, Ru --> Os directional transfer of excitation energy takes place in the complexes [(tpy)Ru(3)Os(tpy)]4+ (end-to-end) and [(tpy)Ru(3)Os(3)Ru(tpy)]6+ (periphery-to-centre). With respect to the homometallic case, for [(tpy)Ru(3)Os(3)Ru(tpy)]6+ excitation trapping at the central position is accompanied by a fivefold enhancement of luminescence intensity.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Investigations of a novel process to the framework of benzo[c]cinnoline

A novel synthetic process leading to the framework of benzo[c]cinnoline has been discovered and investigated. The process is composed of two separate reactions, the first of which is a partial reduction of the nitro groups of the 2,2'-dinitrobiphenyl, a process that we believe proceeds via a SET mechanism to yield the hydroxyamino and nitroso groups. In the following step the cyclization takes place under formation of the -N=N- bond. We believe that this process take place via a radical mechanism through the nitroso radical anion. The novel process affords either benzo[c]cinnoline or benzo[c]cinnoline N-oxide, both in high yields, 93% and 91%, respectively. To obtain benzo[c]cinnoline, the reaction is conducted with an alcohol as solvent and an alkoxide as the base, while for benzo[c]cinnoline N-oxide, water is used as solvent with sodium hydroxide as the base. To establish the latter procedure, statistical experimental design and multivariate modeling were utilized to reveal the response surface for the reaction and to determine the optimal conditions for the reaction. A proposal for the complex reaction mechanism is given. During the corroboration of the mechanism, a new deoxygenation reaction for converting benzo[c]cinnoline N-oxide into benzo[c]cinnoline was discovered. The reaction is conducted by treating the N-oxide with sodium ethoxide at elevated temperature to achieve near-quantitative conversion into benzo[c]cinnoline in a yield of 96%.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Liquid-Phase Selective Oxidation of Propane on Silica-Supported Nafion Catalysts

The liquid-phase partial oxidation of propane in the presence of the Fen+/H2O2 Fenton system at 70℃ and 1.4 atm on silica supported Nafion catalysts has been investigated. The reaction proceeds via a radical reaction path the efficiency of which is improved by silica-supported Nafion catalysts. Because of the direct relationship between reaction rate and concentration of sulphonic acid sites of Nafion catalysts, it is inferred that the active phase enahnces the kinetics of propane conversion by promoting the rate of active radicals generation.     

Laser-induced breakdown spectroscopy analysis of minerals: Carbonates and silicates

Laser-induced breakdown spectroscopy (LIBS) provides an alternative chemical analytical technique that obviates the issues of sample preparation and sample destruction common to most laboratory-based analytical methods. This contribution explores the capability of LIBS analysis to identify carbonate and silicate minerals rapidly and accurately. Fifty-two mineral samples (18 carbonates, 9 pyroxenes and pyroxenoids, 6 amphiboles, 8 phyllosilicates, and 11 feldspars) were analyzed by LIBS. Two composite broadband spectra (averages of 10 shots each) were calculated for each sample to produce two databases each containing the composite LIBS spectra for the same 52 mineral samples. By using correlation coefficients resulting from the regression of the intensities of pairs of LIBS spectra, all 52 minerals were correctly identified in the database. If the LIBS spectra of each sample were compared to a database containing the other 51 minerals, 65% were identified as a mineral of similar composition from the same mineral family. The remaining minerals were misidentified for two reasons: 1) the mineral had high concentrations of an element not present in the database; and 2) the mineral was identified as a mineral with similar elemental composition from a different family. For instance, the Ca–Mg carbonate dolomite was misidentified as the Ca–Mg silicate diopside. This pilot study suggests that LIBS has promise in mineral identification and in situ analysis of minerals that record geological processes.     

Binuclear wirelike dimers based on ruthenium(II)-bipyridine units linked by ethynylene-oligothiophene-ethynylene bridges

The syntheses, structural characteristics, electrochemical behavior, ground-state spectra, photophysical properties, and transient absorption (TA) spectra in CH(3)CN solvent are reported for binuclear [(bpy)(2)Ru(bpy-E(T)(n)()E-bpy)Ru(bpy)(2)](4+) complexes, Ru(bpyT(n)bpy)Ru, where the Ru-based units are connected by alternating 3,4-dibutylthiophene (DBT')/thiophene (T') fragments linked via ethynyl groups (E) to bpy ligands at the 5-position (bpy is 2,2'-bipyridine). The ligand bpyT(3)bpy represents a module containing DBT'/T'/DBT' subunits, and bpyT(5)bpy accounts for a DBT'/T'/DBT'/T'/DBT' pattern. The syntheses and electrochemical and spectroscopic (emission and TA) properties in CH(2)Cl(2) solvent of the bpyT(n)()bpy ligands are likewise reported. The behavior of the Ru(bpyT(n)bpy)Ru dimers has been compared to that of the bpyT(n)bpy ligands and to that of a related mononuclear complex, [(bpy)(2)Ru(bpy-E-DBT')](2+), Ru(bpyDBT'). For the dimeric complexes, the electrochemical results show that the first reduction step takes place at the bpy ligand(s) bearing an ethynylene group, the first oxidation step is thiophene-centered, and further oxidation involves the metal centers, which are only weakly interacting. The photophysical and TA results for the Ru(bpyT(n)bpy)Ru dimers account for the presence of low-lying oligothiophene-centered (3)pi,pi levels, while higher-lying metal-ligand charge transfer ((3)MLCT) levels are thermally accessible only for the case of Ru(bpyT(3)bpy)Ru; the possible role of charge separation (CS) levels (from oxidation at the thiophene bridge and reduction at one of the coordinated bpy's) is also discussed.